„MSP430 MCU” változatai közötti eltérés

Innen: apaboard
Ugrás a navigációhoz Ugrás a kereséshez
1. sor: 1. sor:
== MSP430 MCU family from TI ==
== MSP430 MCU family from TI ==
[[Fájl:Slab034ad-p12.jpg|bélyegkép|balra]]
[[Fájl:Slab034ad-p12.jpg|bélyegkép|balra]]
[[Fájl:msp430_roadmap.png|bélyegkép|balra]]
[[Fájl:msp430_roadmap.png|bélyegkép|balra]]

A lap 2017. december 16., 13:26-kori változata

MSP430 MCU family from TI

Slab034ad-p12.jpg
Msp430 roadmap.png
Msp430 fejleszto eszkoz.png
Msp430G2xx value line parts.png
Msp430 uc s.png
MSP430 Part Number Decoder 2011.png
MSP430 decoder.png
MSP432 decoder.png

http://www.ti.com/lit/sg/slab034ad/slab034ad.pdf

MSP430G2553 launchpad

32khz-crystal

Load capacitance !!!

http://www.msp430launchpad.com/2012/03/using-aclk-and-32khz-crystal.html

For example, the LaunchPad uses 12pF capacitors to load the crystal we just installed, yet many crystals require 22pF.

Edit: This statement is actually incorrect. Another big thank you goes out to Jens-Michael for pointing it out to me. Thanks for reading! "12pF is the typical load for most crystals I've ever seen. But due to the electric connection, a 12pF load means [there will be 2] 24pF capacitance on each of the crystals sides. Reason is that (seen from the crystal), the two capacitors are in series to each other and parallel to the crystal. […] Subtract the ~2pF pin capacitance of the MSPs pins and you get [two separate] 22pF [for] external capacitors, resulting in 12pF load. The XCAP settings already include pin capacitance and the /2 factor."

https://www.allaboutcircuits.com/textbook/direct-current/chpt-13/series-and-parallel-capacitors/

MSP430 infók

MSP430 MCU-s from TI

http://processors.wiki.ti.com/index.php/MSP430_FAQ

MSP430FR2433 infók

http://www.ti.com/microcontrollers/msp430-ultra-low-power-mcus/msp430f2x-f4x/overview.html

Msp430f2xx-mcu-block-diagram.jpg
LaunchPad-MSP430FR2433-Pins-Map.jpg